Custom Wine Cellars

WINE CELLAR COOLING UNIT SC PRO 2000 BY WHISPERKOOL

• Cooling capacity of 300 cu. ft.*
• Digital control display
• Advanced electronic temperature control
• Dynamic airflow
• Liquid bottle probe
• Alarm in case of significant temperature changes
• Through-the-wall installation, partially ducted
• Up to 30°F/16°C  temperature differential
• Option vent available
• Continuous amperage: 4,2

Consult PDF for more information.

Warranty: 2 years parts and labor, 5 years compressor

SC Series by WhisperKOOL

The SC Series come in 5 models that effectively cool a 300 to 2000 cu. ft. properly insulated environment. Designed for simple through-the-wall installation, the unit fits between standard wall studs and a single piece mounting bracket eliminates the need for a support shelf. The SC has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F.

Self Contained systems are the most economical and easiest to install. They are designed to mount between the studs of an existing wall, and they do not require a licensed HVAC/R installation technician. One end of the system blows cool air in to the cellar, and the other end absorbs heat from the cellar and exhausts the heat into an area adjacent to the cellar. Self-contained units will make more noise than a split or ducted system. 

The unit must be connected to a condensate drain located on the inside of the cellar.

The 110-volt electrical connection on a preferably dedicated 15-amp circuit is made inside the cellar.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 DUCTED OMEGA

• This two-component system has the capacity to cool a cellar of up to 2000 ft³ *
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers Omega 110volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 4000 DUCTED OMEGA

• This two-component system has the capacity to cool a cellar of up to 1000 ft³ *
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers Omega 110volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 COPELAND

• This three-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Platinum Series ducted by WhisperKOOL

Those powerful systems from WhisperKOOL are made for an efficient Split AND Fully Ducted installation. For wine cellars  from 1000 to 2000 cu. ft, the system is designed for Powerful Operation, Efficiency, High Reliability and Longevity. The units can be positioned up to 25 ducted feet from the cellar with the compressor located in a remote location, creating a noise-free cellar environment. Fully ducted installation provides many installation options, allowing you to put the the evaporator (cold side) in more remote areas of the home. A licensed HVAC or refrigeration technician is required for the installation.

Ducted systems can be Self-Contained or Split systems and typically have more installation options/flexibility. The unit may be installed up to 25 ducted feet from the cellar, with the cool air flowing to the cellar and the heat exhaust ducted to the outside of the home. Ducting is also a more aesthetic choice for wine collectors who do not want to see a cooling unit in the cellar. Noise from the unit will be reduced or eliminated, depending on the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers High efficiency 220volts are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM TWIN 9000 COPELAND

• This three-component system has the capacity to cool a cellar of up to 3000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Platinum Series by WhisperKOOL

This compact system cools up to 3000 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 220 volts circuit.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 8000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 2000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential.

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM 4000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 1000 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential
  

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT PLATINUM MINI-SPLIT OMEGA

• This two-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Platinum Series by WhisperKOOL

This compact system cools up to 500 cubic feet and offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment. The compressor is located in a remote location and the evaporator (cold side) mounted in the cellar. Since space in a small cellar is vital, the Platinum Mini-Split offers a compact size paired with powerful efficiency. A licensed HVAC or refrigeration technician is required for the installation.

Split systems are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. The condenser requires a dedicated 110 volts circuit. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT TWIN 9000 OMEGA

• This two-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 220 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT 8000 OMEGA

• Cooling capacity of 2000 cu. ft.*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) Omega operating on 110 volts.
• The condenser unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT 4000 OMEGA

• Cooling capacity of 1000 cu. ft. *
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) Omega operating on 110 volts.
• The condenser unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential

2 year warranty, parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Ceiling Mount Series by WhisperKOOL

WhisperKOOL have created a Ceiling Mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation. 

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.

WINE CELLAR COOLING UNIT CEILING MOUNT MINI-SPLIT OMEGA

• This two-component system has the capacity to cool a cellar of up to 500 ft³*
• The Cooling Unit ( Evaporator ) is quiet and efficient
• Digital control keypad. ( System alerts when desired set points are not met )
• Precise electronic temperature control (probe in bottle reading liquid temperature )
• 2-speed fan. ( Dispersion power mode when required and quiet in normal operation )
• Conversion kit for 24v Wi-Fi thermostat ( Available on request )
• Front grille with replaceable air filter
• Humidity control
• Condenser Unit ( Compressor ) operating on 110 volts.
• The Condenser Unit is designed to be installed indoors, but can also be installed outdoors thanks to a specially designed housing.
• Flexible installation ( Up to 100 feet distance between cellar chiller and condenser unit )
• Quick-connect system ( requires specialized technician )
• Up to 55°F temperature differential
  

2 year warranty parts and labor
Consult PDF for more information

Due to the current trade environment, customs duties of up to 15% may be added to the final price upon delivery.

Ceiling Mount Series by WhisperKOOL

The Ceiling Mount Series offers high power systems with a Split type installation. For parts from 500 to 2000 ft3, you will get an efficient, powerful and reliable device. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar. Utilizing the Ceiling Mounted evaporator has many benefits: It offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cools and disperses the air throughout the environment, allows for maximum racking space, and is virtually invisible in the cellar. Designed with the highest quality, professional grade parts for longevity and performance, it also offers ease of installation and accessibility. The grille of unit comes with a smooth, black primered finish, excellent for painting and color matching.

Split systems installations are often the most efficient way to cool a cellar. Cooling unit condensers are typically noisy and require significant space for ventilation, in most cases the cellar location does not include an area for these functions. By splitting the cooling system, the condenser can be placed in a space better suited for heat and noise dissipation while the quiet evaporator is inside, or near, the cellar. A licensed HVAC/R technician is required for the installation.

*When the cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit.